Made of AISI 304 stainless steel, electrically powered with automatic control.

Functionality: The electric pump, activated by the operator through the switch, allows the recirculation of the cleaning liquid from the storage tank to the injectors and discharges it into the same tank.

Functionality: The pneumatic pump, activated by the operator through the control panel, allows the recirculation of the washing solvent from the storage tank to the injectors located both inside and outside of the frames. An area dedicated to small parts washing is also available.

Thanks to the pneumatic motor, the frames rotate constantly in order to obtain a complete and uniform cleaning. The washing solvent is stored in the service tank, avoiding evaporative loss and consequent air pollution . The emptying of the service tank, as well as rinsing with recovered solvent can be operated either manually or automatically.

Thanks to the alternated and oscillating movement of two brushes, it is possible to ensure a deep and extremely economic cleaning, as well as the removal of all ink residuals from the plates.

All operations are managed by a programmable logic circuit, equipped with a digital display which allows to show and to check washing parameters.

Thanks to ultrasonic technology it is possible to ensure a deep and extremely economical cleaning.

The washing unit body is made entirely of AISI 304 stainless steel and all operations are managed by a programmable microprocessor, equipped with TOUCH SCREEN digital display showing the washing cycle data, any anomalies (errors diagnostic) and periodic maintenance recommended.

Functionality: The functioning is simple and efficient and allows the cleaning of both ink trays and complementary equipment, such as doctor blades, recirculation ink tanks and protection guards. The washing units Series EXL WASH perform automatically the sequence: washing / rinsing / pause / suction valve open / stop. The washing liquid is stored in the service tank, avoiding evaporative loss and consequent air pollution. The rinsing liquid is taken from external tanks or drums to ensure the maximum cleaning quality. The emptying of the service tank, as well as rinsing with recovered liquid can be operated either manually or automatically. Also available in pneumatic or electropneumatic ATEX version

Functionality: The pneumatic pump, activated by the operator through the pedal, allows the recirculation of the washing liquid from the tank to the brush used for parts cleaning. The washing takes place under the protection of a sealed glass cover, and the operator’s hands are protected by integrated solvent-proof gloves.

Made entirely of stainless steel AISI 304, it offers an excellent s

olution for reducing bucket disposal and replacement cost.

Functionality: The pneumatic pump activated by the operator through the timer allows the recirculation of the washing solvent from the storage tank to the special rotating injectors to obtain a rapid and economical cleaning of the drum.

Available in models for 4 and 8 cylinders, these washing units are designed to clean printing cylinders and small-medium parts. Made entirely of AISI 304 stainless steel, operated exclusively by pneumatics and with automatic control. <strong

>Functionality: The functioning is simple and efficient and allows the cleaning of both printing cylinders, using the motorized system, and complementary equipment of the machine. The washing solvent is stored in the service tank, avoiding evaporative loss and consequent air pollution. The emptying of the service tank, as well as rinsing with recovered solvent, can be operated either manually or automatically.

Made entirely of AISI 304 stainless steel, operated exclusively with automatic washing cycle.

Equipped with no. 2 trolleys to support the housing grid for parts to be washed and sliding door with vertical movement, the washing machines Series XTR WASH are designed to make easier for the operator the loading of parts to be washed inside the washing area.

Functionality: The functioning is simple and efficient and allows the cleaning of both ink trays and complementary equipment, such as doctor blades, recirculation ink tanks and protection guards. The washing units Series XTR WASH perform automatically the sequence: washing / rinsing / pause / suction valve open / stop. The washing solvent is stored in the service tank, avoiding evaporative loss and consequent air pollution. The rinsing solvent is taken from external tanks or drums to ensure the maximum cleaning quality. The emptying of the service tank, as well as rinsing with recovered solvent, can be operated either manually or automatically.

Also available in electric or electropneumatic ATEX version